Note:
CAN Bus
connector: 40 Pin Quadlock BMW
connector: +12V continuous current yellow clamp 30 battery fused
connector: OEM amplified system MOST RCA(m) red/white
connector: OEM SWC 3,5mm Jack / loose wire
vehicles with Business Professional OEM HU
vehicles with OEM MOST amplified system
vehicles without iDrive
PDC not supported*
warning chimes not supported*
dip switch settings for the retrofit device manufacturer (look into the manual)
RCA(m) front preamp output retrofit HU
fader function not supported
Vehicle application:
BMW 1 series (E81/82/87/88) 03/2004 – 10/2013
BMW 3 series (E90/91/92/93) 03/2005 – 10/2013
BMW 5 series (E60/61) 07/2003 – 07/2010
BMW X5 (E70) 03/2007 – 09/2013
BMW X6 (E71/E72) 05/2008 – 06/2014
Following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
red: +12V ignition clamp 15
orange: +12V illumination clamp 58
purple/white: +12V reverse gear signal
pink: speed pulse signal
green: GND park brake signal
load capacity outputs: 250 mA max.
current requirement more than 250 mA:
1 relay coil resistance 75 Ohm min.
2 relays coil resistance 150 Ohm min.
SWC
OEM amplified system fader function not supported
*vehicles with PDC / warning chimes item: can-pdc
Arviot
Tuotearvioita ei vielä ole.