Valmistaja: Emotiva

Emotiva XPA-9 Gen 3

2850,00€ 2850,00€/
126,00€/kk
Väri
Määrä: kpl
Tee tarjous

Emotiva XPA-9 Gen 3 on 5 x 400w + 4 x 100w 4ohm 7 x 380 4ohm päätevahvistin modulaarisella rakenteella. Voit lisätä kanavia samaan koteloon myöhemmin aina 11 kanavaa asti.

The XPA-9 Gen3 is a nine-channel audiophile power amplifier that delivers exceptionally accurate and dynamic renditions of all types of music. The XPA-9 Gen3 offers the rare combination of excellent technical performance and superb sound quality, which makes it the perfect solution for listening to your favorite multi-channel music or for listening to movie soundtracks in a high-end home theater system.

The XPA-9 Gen3 features five of our High-Powered Single Channel Modules and two of our Stereo Modules – for a total of five high-powered channels and four low-powered channels. This combination is ideal to power a surround sound system that includes five large speakers and four smaller height speakers – and is the perfect amplifier to power a Dolby Atmos 7.1.2 or 5.1.4 system. The XPA-9 Gen3 would also be a great choice for driving a 7.1 or 7.2 channel surround sound system that also includes a second pair of small speakers – perhaps ceiling speakers – in a second zone.

 

Circuit Topology

  • The XPA-9 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection.

  • The XPA-9 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

Audio Specifications

The XPA-9 Gen3 features five of our High-Powered Single Channel Modules and two of our Stereo Modules.  

Audio Specifications (High-Powered Single Channel Modules):

  • Power Output:
    300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
    550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
    300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
    490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

  • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

  • Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.

  • THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.

  • Signal to Noise Ratio (8 Ohm load):
    > 115 dB; ref FTC rated power; unbalanced input (A-weighted).
    > 86 dB; ref 1 watt; unbalanced input (A-weighted).

  • Minimum Recommended Load Impedance (per channel): 4 Ohms
    (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

  • Damping Factor (8 Ohm load): > 500.

  • Input Sensitivity (for rated power; 8 Ohm load): 1.5 V.

  • Gain: 29 dB.

  • Input Impedance:
    33 kOhms (balanced).
    23.5 kOhms (unbalanced).

Audio Specifications (Stereo Modules):

  • Power Output:
    65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven.
    100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven.
    65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven.
    100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.

  • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).

  • Broad Band Frequency Response: 50 Hz to 80 kHz +0/-1.5 dB.

  • THD + noise: < 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms.

  • Signal to Noise Ratio (8 Ohm load):
    > 105 dB; ref FTC rated power; unbalanced input (A-weighted).
    > 85 dB; ref 1 watt; unbalanced input (A-weighted).

  • Minimum Recommended Load Impedance (per channel): 4 Ohms
    (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

  • Damping Factor (8 Ohm load): > 500.

  • Input Sensitivity (for rated power; 8 Ohm load): 0.8 V (800 mV).

  • Gain: 29 dB.

  • Input Impedance:
    33 kOhms (balanced).
    23.5 kOhms (unbalanced).

Input And Output Connections

  • Input Connections (High-Powered Single Channel Modules):
    Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.

  • Input Connections (Stereo Modules):
    2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable.

  • Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.

  • Trigger:
    Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
    Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements

  • Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).

Front Panel Controls and Indicators

  • Standby: push button (halo ring changes color to indicate Standby or On).

  • Status LEDs: one per channel; blue.

  • Status LEDs change to red to indicate a fault condition.

Rear Panel Controls

  • AC Power switch: rocker switch (switches AC main power).

  • Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.

  • Input selector switches (one per channel): 
    metal toggle switches; select between balanced and unbalanced inputs.

  • Circuit Breaker: press button to reset circuit breaker.

Protection

  • The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

Mechanical

  • Dimensions: 432 x 203 x 483 mm

  • Weight: 24 kg 

Tällä hetkellä ei löydy tuotearvioita.

Kirjoita arvio