Valmistaja: Emotiva

Emotiva XSP-1 Gen 2

1649,00€ 1649,00€/
74,60€/kk
Väri
Määrä: kpl
Tee tarjous

XSP-1 Gen 2 on 2-kanavainen esivahvistin huippuluokan komponenteilla. Kotiteatterikytkentä, subwoofer lähtö, säädettävät yli- ja alipäästösuodattimet, sekä korkealaatuinen levysoitintulo.

Audio Specifications

  • Balanced Input to Balanced Output:
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 117 dB.
    Frequency response: 20 Hz to 20 kHz +/- 0.02 dB.
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0004%.
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%.
    Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB.

  • Unbalanced Input to Unbalanced Output:
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 113 dB.
    Frequency response: 20 Hz to 20 kHz +/- 0.015 dB.
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0006%.
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%.
    Crosstalk (measured at +6 dBF, 10 kHz): < 102 dB.

  • Balanced Input to Unbalanced Output:
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 114 dB.
    Frequency response: 20 Hz to 20 kHz +/- 0.015 dB.
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0005%.
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.0015%.
    Crosstalk (measured at +6 dBF, 10 kHz): < 105 dB.

  • Unbalanced Input to Balanced Output:
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 115 dB.
    Frequency response: 20 Hz to 20 kHz +/- 0.017 dB.
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0003%.
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.007%.
    Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB.

  • Phono (Moving Coil; phono in to balanced out):
    Gain (1 kHz, Volume at 0): approximately 60 dB.
    Input impedance (user selectable): 47 ohms, 100 ohms, 470 ohms, 1k ohm.
    S/N (signal-to-noise ratio, A-weighted, ref 1.0 mV in): > 79 dB.
    Frequency response (ref standard RIAA curve): 20 Hz to 20 kHz +/- 0.35 dB.
    THD (total harmonic distortion, ref 1.0 mV): < 0.008%.
    IMD (intermodulation distortion, SMPTE method: < 0.15 %.
    Crosstalk: < 65 dB.

  • Phono (Moving Magnet; phono in to balanced out):
    Gain (1 kHz, Volume at 0): approximately 40 dB.
    Input impedance: 47k Ohms.
    S/N (signal-to-noise ratio, A-weighted, ref 10.0 mV in, A-weighted): > 96 dB.
    Frequency response (ref standard RIAA curve): 20 Hz to 20 kHz +/- 0.3 .dB.
    THD (total harmonic distortion, ref 10 mV): < 0.001%.
    IMD (intermodulation distortion, SMPTE method: < 0.05%.
    Crosstalk: < 80 dB.

Inputs And Outputs

  • Line level Input: 2 pairs balanced; 4 pairs unbalanced.

  • Home Theater (line level, left, right, sub) Input: 1 set balanced; 1 set unbalanced.

  • Processor Loop (line level) Input: 1 pair unbalanced.

  • Input Impedance (line level) Input: 50k ohms.

  • Phono Input (MM or MC): 1 pair unbalanced.

  • Main Outputs: 1 pair balanced; 1 pair unbalanced
    (Main outputs may be configured as flat or high-pass; 
    high-pass is adjustable from 50 Hz to 250 Hz).

  • Subwoofer (left, right, summed) Output: 1 set balanced; 1 set unbalanced
    (Subwoofer outputs may be configured as flat or low-pass; 
    low-pass is adjustable from 50 Hz to 250 Hz).

  • Processor Loop (line level) Output: 1 pair unbalanced.

  • Minimum recommended load impedance: 600 ohms.

  • Trigger Input and Output: 1 each.
    IR input and output: 1 each.

Trims And Adjustments

  • Gain structure:
    Nominal output level: 0 dBV (1 V).
    Nominal gain (with Volume set to “0”): 1.
    Maximum gain: +12 dB.

  • High-Frequency and Low-Frequency Trims:
    HF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 12 kHz.
    HF trim (inflection point): 4 kHz.
    LF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 50 Hz.
    LF trim (inflection point): 200 Hz.

  • Bass Management:
    Crossover slopes (high-pass and low-pass): 12 dB / octave.
    Crossover frequency (high-pass and low-pass): User configurable, 50 Hz to 250 Hz.

Power Requirements

  • Operating Voltage: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz
    (automatically detected and switched).
    Power consumption (On): 32 watts
    Power consumption (Standby): <1 watt

Mechanical

  • Dimensions: 432 x 152 x 420 mm
  • Weight: 13 kg

Tällä hetkellä ei löydy tuotearvioita.

Kirjoita arvio